Vernee V2 Pro

On this page, you will find the official Vernee V2 Pro Stock Firmware ROM (Flash File). The Firmware (flash file) comes as a zip package and contains the original How-to Flash Guide, USB Driver, Flash Tool, and Flash File (ROM).

Vernee V2 Pro Stock Firmware (Flash File ROM)

The Stock Firmware can be used to re-install the original OS on the device. It can also be used to fix any software related issue, bootloop issue or dead issue.

Firmware Name:
Firmware Size: 1 GB
How to Flash: Copy the file to phone sd memory and flash it from recovery.

Get Link

How to Flash Vernee V2 Pro Firmware

Step 1: Download and Extract the Vernee V2 Pro Stock Firmware on your Computer.

Step 2: Once you have extracted the zip package on your computer, you will be able to see the How to Flash Guide, USB Driver, Flash Tool and Flash File (ROM).

Step 3: Now, install the provided USB Driver on your Computer.

Step 4: Now, Connect your Device to the computer using the USB Cable.

Step 5: Once your device is connected to the computer, Copy the file to the phone SD memory.

Step 6: Now, disconnect your device from the computer.

Step 7: Now, Turn Off your device and boot the device into the Recovery mode (Press and Hold Volume UP + Power Key).

Step 8: Once your device is booted into the recovery mode, select the file to flash it.

Step 9: Once Flashing is completed, restart the device.


[*] Backup: Before flashing the Firmware on your Android Device, we recommend you to take a backup of your personal data, as flashing will permanently delete your personal data from the device.

[*] Original firmware: On, we only serve the original firmware (flash file) released by the device manufacturer. We have personally scanned, each of the firmware package using the Eset antivirus before sharing it online.

Load Comments
Made with ♥ in Spain | Powered by BlueHost

Copyright © 2015-2019 XDA Firmware. All Rights Reserved.