Are you looking for the official Mywigo Halley 2 Stock Firmware ROM (Flash File)? If Yes, then this page is for you. The Firmware (Flash File) comes in a zip package which contains the original How-to Install Guide, USB Driver, Flash Tool, and Flash File (ROM).
Mywigo Halley 2 Stock Firmware ROM (Flash File)
You can use the Stock Firmware to re-install the Operating System (OS) on the device. You can also use it to Fix any software-related issue, bootloop issue, or dead issue.
Firmware Name: Mywigo_Halley_2_MT6735M_6.0_OTA.zip
Firmware Size: 2 GB
How-to Flash (install): Copy the update.zip file to phone sd memory and flash it from recovery.
How-to Flash Mywigo Halley 2 Firmware
- Download and Extract the Mywigo Halley 2 Stock Firmware on the Computer.
- Once you have extracted the zip package on the computer, you will be able to get the How-to Flash Guide, USB Driver, Flash Tool and update.zip Flash File (ROM).
- Now, install the provided USB Driver on the Computer.
- Now, Connect your Device to the computer using the USB Cable.
- Once your device is connected to the computer, Copy the update.zip file to the phone SD memory.
- Now, disconnect your device from the computer.
- Now, Turn Off your device and boot the device into the Recovery mode (Press and Hold Volume UP + Power Key).
- Once your device is booted into the recovery mode, select the update.zip file to flash it.
- Once Flashing is completed, restart the device.
[*] Backup: Before flashing the Firmware on your Android Device, we recommend you to take a backup of your data, as flashing will permanently delete your data from the device.
[*] Official Firmware: On xdafirmware.com, we only serve the original Firmware (Flash File) released by the device manufacturer in its original state. We have personally scanned the above firmware package using Malwarebytes Premium.