Are you looking for the official Jiayu G1 Stock Firmware ROM (Flash File)? If Yes, then this page is for you. The Firmware (Flash File) comes in a zip package which contains the original How-to Install Guide, USB Driver, Flash Tool, and Flash File (ROM).
Download Jiayu G1 Stock Firmware ROM (Flash File)
You can use the Stock Firmware to re-install the Operating System (OS) on the device. You can also use it to Fix any software-related issue, bootloop issue, or dead issue.
Firmware Name: Jiayu_G1_MP_MT13_x100_120330_OTA.zip
Firmware Size: 139 MB
How-to Flash (install): Copy the update.zip file to phone sd memory and flash it from recovery.
How to Flash Jiayu G1 Firmware
- Download and Extract the Jiayu G1 Stock Firmware on the Computer.
- Once you have extracted the zip package on the computer, you will be able to get the How-to Flash Guide, USB Driver, Flash Tool, and update.zip Flash File (ROM).
- Now, install the provided USB Driver on the Computer.
- Now, Connect your Device to the computer using the USB Cable.
- Once your device is connected to the computer, Copy the update.zip file to the phone SD memory.
- Now, disconnect your device from the computer.
- Now, Turn Off your device and boot the device into the Recovery mode (Press and Hold Volume UP + Power Key).
- Once your device is booted into the recovery mode, select the update.zip file to flash it.
- Once Flashing is completed, restart the device.
[*] Backup: Take a backup of your Data before using the Flash Tool to Flash or Install the Firmware on the Mobile, as installing the firmware will wipe out the device’s data, including Settings, Applications and Photos.
[*] Official Firmware: On xdafirmware.com, we only serve the original Firmware (Flash File) released by the device manufacturer in its original state. We have personally scanned the above firmware package using Malwarebytes Premium.