Are you looking for the official Alldocube iPlay 30 T1012 Stock Firmware ROM (Flash File)? If Yes, then this page is for you. The Firmware (Flash File) comes in a zip package which contains the original How-to Install Guide, USB Driver, Flash Tool, and Flash File (ROM).
Alldocube iPlay 30 T1012 Stock Firmware ROM (Flash File)
You can use the Stock Firmware to re-install the Operating System (OS) on the device. You can also use it to Fix any software-related issue, bootloop issue, or dead issue.
How to Flash Alldocube iPlay 30 T1012 Firmware
- Download and Extract the Alldocube iPlay 30 T1012 Stock Firmware on the Computer.
- Once you have extracted the zip package on the computer, you will be able to get the How-to Flash Guide, USB Driver, Flash Tool, and Flash File (ROM).
- Now, install the provided USB Driver on the Computer.
- Once you have successfully installed the USB Driver on your Computer, Launch the Flash Tool on the computer.
- Once Flash Tool is launched, Load the Flash File (Firmware) in the Flash Tool.
- Connect your Device to the Computer using the USB Cable.
- Click on the Download (in flash tool) button to begin the flashing process.
- Once the Flashing process is completed, Disconnect your Alldocube iPlay 30 T1012 device from the computer and restart it.
[*] Backup: Take a backup of your Data before using the SP Flash Tool to Flash or Install the Firmware on the Mobile, as flashing or installing the firmware will wipe out the device’s data, including Settings, Applications and Photos.
[*] Caution: On Mediatek Devices, We do NOT recommend flashing or installing the preloader.bin. Instead, as it may brick the device, we recommend you Untick the Preloader while Flashing the firmware.
[*] Official Firmware: On xdafirmware.com, we only serve the original Firmware (Flash File) released by the device manufacturer in its original state. We have personally scanned the above firmware package using Malwarebytes Premium.